Thanks to Chad in the comments, he found how to get around the current issue where the version of Hydra installed on DSM6.0 devices is out of date, a quick run down of the issue is that the version of Docker currently used on DSM6.0 uses the old v1 API to get hold of the versions of images available. This means the latest version you can get of Hydra is ’10’. This issue is fixed in DSM6.1 which uses the v2 of the docker API. I have amended the guide below accordingly
In this guide I will be taking you through the steps to download and setup NZB Hydra in Docker on a Synology NAS, this makes some assumptions that you know your way around the DSM interface and have already read one of my previous guides.
NZB Hydra combines all your various indexers into a single search site, this can then be fed into Couchpotato, Sonarr etc. This means you only need to update the single application whenever you want to add a new indexer rather than each one individually.
Downloading the container
Login to your Diskstation via SSH and then enter ‘sudo docker pull linuxserver/hydra’ this will download the latest version of the Hydra container, it will appear in the list of available containers immediately at the time of writing its just 73mb compared to the old version which is 700mb, you can now skip to PGID and PUID section.
Open up Docker within DSM and navigate to the ‘Registry’ section and search for Hydra in the keyword box. Right click and download the Linux|Server version. When it asks which version number you want to use just choose latest this will ensure the container updates to new versions when they are released.
If you now go to the ‘Image’ section you will see the container downloading.
PGID and PUID
In the previous versions of these guides I used a long winded approach to getting your ID information, I have since found a much easier approach.
You will need to SSH into your Diskstation using ‘Putty’ or an equivalent program.
Open up Putty, the only thing you need to enter is the IP address of your NAS and select the SSH radio button.
Click on open, you will get a prompt asking if you trust the key, if this is the first time you have used SSH, just press OK or accept.
Enter the login information for you Synology user account, you will not be able to see the password as you type it, I use a very long one so I just paste it in from my password manager. (right click acts as paste in putty)
Once logged in type ‘id’ without the quotes and this will show your UID(aka PUID) which in my case is 1026 and the GID(aka PGID) which is 101 for an administrator
Setting up the container
Back in the ‘Image’ menu highlight the NZB Hydra container and click on Launch. This will open up the setup wizard.
On the first screen I am not making any changes as I do not need to limit the resources on my 1815+ as I have 6GB of RAM, just go straight into ‘Advanced Settings’.
Tick the ‘Enable Auto Restart’ this will ensure the container starts up automatically if you reboot.
On the ‘Volume’ tab you need to add the paths to where you want to keep the config files and where you want to place any NZBs grabbed by using Hydra directly.
I always use the Docker folder and then a sub-directory for all configs.
Skip the ‘Network’ tab
Next is the ‘Port Settings’ tab you will need to change the Auto setting to either the identical port number 5075 or change it to a custom one if you want to. This is the port you will use to access the Hydra container.
Last up is the PGID and PUID that we made note of earlier in the guide.
Click on OK to get back to the main menu and then click on next, tick the ‘Run this container after the wizard has finished’ and hit ‘Apply’
The container should now start up, this can be seen in the ‘Container’ tab as the RAM and CPU usage should fluctuate as it starts, its worth giving it a minute or so on its first launch just in case it needs to download any updates during boot. You should then be able to access the interface via your Synology IP and the port number you chose earlier.