Skip to content

Radarr in Docker on a Synology NAS

Please note if you are using DSM7.2 or higher you should use the Container Manager version of this guide from the menu.
This guide has reached the end of its updates as most people are now on the latest DSM update - This guide is correct as of 08/12/2023 however no further updates will be added.
UpdateDate
Removed docker compose section as rarely used18/07/2023
Historic updates now at the end of the guide.


What is Radarr?

Radarr is used to search, download and organise your Movies in conjunction with your preferred Usenet or Torrent downloaders and indexers.

Let’s Begin

In this guide I will take you through the steps to get Radarr up and running in Docker.

In order for you to successfully use this guide please complete the three preceding guides

Downloading the Radarr Image

Open up Docker within DSM and navigate to the ‘Registry’ tab and search for ‘Radarr’. In the list of available containers select the one made by Linuxserver as shown below then click ‘Download’.

The pop-up box will ask which version you want to download, make sure you choose ‘Latest’ from the list of available versions.

You can check the status of the download over on the ‘Image’ tab.

Setting up the container

In Docker click on the ‘Image’ tab, in the list of your containers select the ‘Linuxserver Radarr’ image and click on ‘Launch’

You will be greeted with the Network screen, we will be using the ‘synobridge’ network we created earlier select it from the list and click Next.

General Settings

Next you will be greeted with the General Settings screen, this is where you can start specifying some of your preferences.

You can change the name of the container to anything you like, and you may want to enable Auto Restart as this will ensure Radarr starts automatically if you reboot your NAS.

You will also notice a Configure capabilities button — don’t change anything in here!

Next up we are going to click on the ‘Advanced Settings’ button, this will take you to a new window with a number of tabs which we are going to work through.

Environment (PGID,  PUID and Timezone)

Next we are going to set up a couple of environment variables that docker will use to allow the container access to our files and folders and also to tell it where we live in the world.

Click the Add button, and fill in the following details as per the table/screenshot, you will need to do one at a time.

VariableValue
PUIDThe UID you obtained in the user setup guide
PGIDThe GID you obtained in the user setup guide
TZYour timezone wikipedia.org/wiki/List_of_tz_database_time_zones

Links / Execution Command

You do not need to set up anything on these tabs.

Press ‘Save’ to go back to the initial setup screen, then press ‘Next’

Port Settings

We won’t be changing any of the ports the container uses. You can repeat the ones shown on the right side of the settings page ‘Container Port’ onto the left side ‘Local Port’ once you have done this press ‘Next’.

Volume Settings

We will now be specifying the directories where Radarr will store its configuration files and where to find our media and downloads.

Click on ‘Add Folder’ select the ‘docker’ folder and create a new sub-folder called ‘radarr’ select this folder and click ‘select’

Repeat this process to add the /data folder.

You will now add the below settings into the ‘Mount path’ section

File/FolderMount path
docker/radarr/config
data/data

Click Next to move to the final screen.

Summary

You have now completed the setup of the container.

You will be shown an overall summary of the settings we have specified, this is a good time to double-check everything is correct. Finally, click on Done and the container should start to boot.

You should now be able to access Radarr via the IP of your NAS followed by the port 7878

e.g., 192.168.0.40:7878

Key Settings and FAQ

Now you have set up Radarr there are some key settings you will need to set as these often catch new users out. I will add more as they come up.

Media Management / Root Folders (Settings>Media Management)

Radarr refers to the place(s) you keep your movies as Root Folders. These are where Radarr will ultimately move your movies to once they finish downloading.

AppRoot Folder
Radarr/data/media/movies

Download Clients (Settings > Download Clients>Remote Path Mappings)

While most of the settings on this page are self-explanatory something that has caught people out if the Remote Path Mappings setting. If you are hosting all your services on the same NAS do not add any settings here.

I can’t get Radarr to Connect to my Download Client!

When setting up your preferred download client or Prowlarr etc. Usually you will use the IP of your NAS, however if for whatever reason this is not working you can use http://172.20.0.1 which is the IP of the ‘synobridge’ gateway.


Historic UpdatesDate
Added Docker Compose details
Added new folder mappings to ensure atomic moves and Hard-linking
03/05/2021
Guide re-written and updated with DSM7 screenshots01/08/2021
Updated screenshots and steps for DSM7.1 03/06/2022
Added new port settings and Docker Bridge Network23/07/2022
Compose version number removed and small wording amendments08/04/2023
Amended the path to save the compose file – this is for security, so the container has no access to the file contents.14/04/2023
Historic Updates

Buy Me a Coffee or a Beer

If you have found my site useful please consider pinging me a tip as it helps cover the cost of running things or just lets me get the odd beverage. Plus 10% goes to the devs of the apps I do guides for every year.

Published inDockerMedia Management 7.1Synology

99 Comments

  1. Christopher C Walker Christopher C Walker

    so what is the root folder path you set in the actual Radarr application?

    it is /data/media, data/usenet?

  2. Simon Simon

    Thank you for all these guides, they have been extremely helpful. I seem to be struggling at the last hurdle though. My Radarr install is throwing the following error:

    Download client SABnzbd places downloads in /data/usenet/completed but Radarr cannot see this directory.

    How do I get past this?

    • Dr_Frankenstein Dr_Frankenstein

      double check your Radarr mount it should be /data to /data meaning it will have access to that directory.

      • Simon Simon

        Thanks for the quick response. Turns out the config needed to be the same as for SABnzbd (data/usenet – /data/usenet).

        • Dr_Frankenstein Dr_Frankenstein

          If you have just /data/usenet passed into Radarr it won’t have any access to your media in /data/media, /data should work

          • Simon Simon

            OK, I have to apologise. I was obviously having a real blonde moment. I still had the SynoCommunity package running as well and was trying to update this config on a that instance which was running on a different port. All good now. Thanks again.

Leave a Reply to Christopher C Walker Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

drfrankenstein.co.uk – writing Synology Docker Guides since 2016 – Join My Discord!