Important or Recent Updates
|Updated to use Container Manager and Projects||29/05/2023|
|Added additional security option to the compose to restrict the container from gaining new privileges||25/10/2023|
What is Scrutiny?
Scrutiny is a Hard Drive Health Dashboard & Monitoring solution, merging manufacturer provided S.M.A.R.T metrics with real-world failure rates.
In this guide I will take you through the steps to get Scrutiny up and running in Docker.
In order for you to successfully use this guide please set up your Docker Bridge Network first.
Getting our drive details
We need to get some details about our drives in order for Scrutiny to read their SMART data.
It’s time to get logged into your Diskstation via SSH, in this guide I am using Windows Terminal however the steps will be similar on Mac and Linux,
Head into the DSM Control Panel > Terminal & SNMP and then enable SSH service.
Open up ‘‘Terminal’
Now type ‘ssh’ then your main admin account username @ your NAS IP Address and hit Enter
You will then be asked to enter the password for the user you used you can either type this or right click in the window to paste (you won’t see it paste the info) then press enter.
Enter the login information for your main Synology user account, you will not be able to see the password as you type it. (If you are using a password manager right-clicking in the window will paste – you won’t be able to see it)
Now we are logged in we just need to do a single command to see our drives, note I am not prefacing this command with sudo as we don’t need the low level detail. You will see permission denied errors, but these can be ignored.
The output you will see depends on the model NAS you own, the two examples below are from an 1821+ and an 1815+ which have 8 bays and the 1821+ has up to 2 NVMEs.
The 1815+ has 8 drives broken down from
The 1821+ has 8 drives broken down into SATA and NVME devices,
sata8 with the
nvme1n1. (Note if you have any eSATA devices connected these will also show)
Make note of the devices you see in your output as we will need them for the config file and compose.
Config Files and Folders
Next let’s create the folders the container will need. Head into FileStation and create a subfolder in the ‘docker’ share called ‘scrutiny’ and then within that another called ‘influxdb’ it should look like the below.
Then if you don’t have one already from my other guides create another folder in the ‘docker’ share called ‘projects’ and within that another one called ‘scrutiny’
Next comes the config files, You can edit this file in a number of ways, but to keep the guide OS-agnostic we will be using the Synology Text Editor package which can be installed via Package Center.
Open up a new text document and paste one of the two code snippets below into it. Use the one that matches up with the way your drives are shown in the previous step (if you come across anything different let me know in the comments!)
version: 1 host: id: "" devices: - device: /dev/sata1 type: 'sat' - device: /dev/sata2 type: 'sat' - device: /dev/sata3 type: 'sat' - device: /dev/sata4 type: 'sat' - device: /dev/sata5 type: 'sat' - device: /dev/sata6 type: 'sat' - device: /dev/sata7 type: 'sat' - device: /dev/sata8 type: 'sat' - device: /dev/nvme0n1 type: 'nvme' - device: /dev/nvme1n1 type: 'nvme'
version: 1 host: id: "" devices: - device: /dev/sda type: 'sat' - device: /dev/sdb type: 'sat' - device: /dev/sdc type: 'sat' - device: /dev/sdd type: 'sat' - device: /dev/sde type: 'sat' - device: /dev/sdf type: 'sat' - device: /dev/sdg type: 'sat' - device: /dev/sdh type: 'sat' - device: /dev/nvme0n1 type: 'nvme' - device: /dev/nvme1n1 type: 'nvme'
You will need to edit the config file in line with the number of drives you had in the output earlier either adding or removing lines accordingly, including adding or removing the NVME drives.
Next you can save this file as ‘collector.yaml’ in the ‘/docker/scrutiny’ folder.
Notifications Config (optional)
This step is optional and depends on if you want to set up some notifications in case one of your drive has issues.
As of writing there are 14 different notification method, as you can imagine I cannot cover every single type in this guide, but this will get the config file in place for you to amend based on your preferences
Open up a new file Text Editor again, this time you need to copy and paste the full contents of the example config file located here
Scroll to the bottom of the file where you will see a number of config options for notifications. You will need to the remove the # from the ‘notify’ and ‘urls’ lines and then depending on which type of notification you decide to set up the # will need to be removed from the corresponding line.
The level of notification you receive (Critical or All Issues) can be set up in the WebUI once Scrutiny is up and running.
Finally, save this file as ‘scrutiny.yaml’ into the /docker/scrutiny folder.
We will be using Docker Compose in the Projects section of Container Manager to set up the container.
Open up Container Manager and click on Project then on the right-hand side click ‘Create’.
In the next screen we will set up our General Settings ‘Project Name’ will be ‘scrutiny’ the ‘Path’ click the button and select the folder we created earlier in ‘/docker/projects/scrutiny’. ‘Source:’ change the drop-down to ‘Create docker-compose.yml’.
Next we are going to drop in our docker compose configuration copy all the code in the box below and paste it into line ‘1’ just like the screenshot.
services: scrutiny: container_name: scrutiny image: ghcr.io/analogj/scrutiny:master-omnibus cap_add: - SYS_RAWIO - SYS_ADMIN ports: - "6090:8080" # webapp - "8086:8086" # influxDB admin volumes: - /run/udev:/run/udev:ro - /volume1/docker/scrutiny:/opt/scrutiny/config - /volume1/docker/scrutiny/influxdb:/opt/scrutiny/influxdb devices: - /dev/nvme0n1:/dev/nvme0n1 - /dev/nvme1n1:/dev/nvme1n1 - /dev/sata1:/dev/sata1 - /dev/sata2:/dev/sata2 - /dev/sata3:/dev/sata3 - /dev/sata4:/dev/sata4 - /dev/sata5:/dev/sata5 - /dev/sata6:/dev/sata6 - /dev/sata7:/dev/sata7 - /dev/sata8:/dev/sata8 environment: - SCRUTINY_WEB_INFLUXDB_TOKEN=ANYLONGSTRING - SCRUTINY_WEB_INFLUXDB_INIT_USERNAME=A-USERNAME - SCRUTINY_WEB_INFLUXDB_INIT_PASSWORD=A-PASSWORD network_mode: synobridge security_opt: - no-new-privileges:true restart: unless-stopped
As you can see the devices section contains all our drives, you will need to amend this again in line with the config file you created earlier. You will need to amend the paths each side of the : so they match, adding or removing drives accordingly including the NVMEs.
e.g., /dev/sata1:/dev/sata1 or /dev/sda:/dev/sda and so on.
In addition to this you will see in the ‘environment’ section three variables that will need to be updated as outlined below, these secure the database used by scrutiny.
|SCRUTINY_WEB_INFLUXDB_TOKEN||enter a sting of characters you can use almost anything treat it like a password so a nice long string|
|SCRUTINY_WEB_INFLUXDB_INIT_USERNAME||This can be anything you like|
|SCRUTINY_WEB_INFLUXDB_INIT_PASSWORD||a secure password|
These 3 values are only required for the first ever setup – you can remove them once Scrutiny is up and running but keep them safe in case you ever need them. Maybe in Vaultwarden!
Once you have made the edits press ‘Next’
You do not need to enable anything on the ‘Web portal settings’ screen click ‘Next’ again.
On the final screen click ‘Done’ which will begin the download of the container image and once downloaded they will be launched!
You will now see Scrutiny running and should have a green status on the left-hand side.
You should now be able to access the Scrutiny WebUI by going to your NAS IP followed by port 6090
Sometimes it can take a few minutes before all your drives appear, as Scrutiny needs to obtain their information so don’t panic if it’s initially empty. You can now adjust settings for the UI and Notifications in the WebUI.
Buy Me a Coffee or Throw me some Sats
If you have found my site useful please consider pinging me a tip as it helps cover the cost of running things or just lets me get the odd beverage. Plus 10% goes to the devs of the apps I do guides for every year.