Skip to content

Arr’s Media Project – Radarr, Sonarr, Lidarr, Prowlarr, Bazarr, Readarr in Container Manager on a Synology NAS

Important or Recent Updates
Historic UpdatesDate
New guide13/09/2023
Added additional security option to the compose to restrict the container from gaining new privileges as well as umask variable25/10/2023
Adjusted the restart variable to make sure containers start on boot28/10/2023
Historic Updates

This guide is going to eventually replace the existing separate guides for all the apps in the title. By combining these into a single project it saves you time and effort in the initial set up and makes updates more seamless.

You can add and remove the containers from this project based on your preferences.

Migration from old guides.

If you followed my older guides where you set up each of these containers in the Container Manager UI or Pre DSM7.2 Docker UI you can follow this one to migrate in a couple of steps.

  1. Stop and delete the existing containers but keep your directories!
  2. Follow the rest of this guide and all your existing configs will be kept using your old files.

Settings for the Arrs

While I cover some very basics towards the end of the guide you really need to make use of the documentation, it goes into detail of how and why the core functions work across the apps. You can find it on the Servarr Wiki.

Let’s Begin

In order for you to successfully use this guide please complete the three initial setup guides if you have not done so already

As Container Manager now supports using Docker Compose in the UI we will be using it as it will save you lots of time and steps!

What on earth is a Docker Compose?
Docker Compose allows us to define how Docker should set up one or more containers within a single configuration file. This file is yaml formatted and Container Manager uses the Projects feature to manage them.


Folder Setup

First we need to set up some folders for the Arr’s to save their configuration files and also where the Project will save the compose.

Using File Station create the following folders. (Skip ones you don’t need)

Folders
/docker/projects/arrs-compose - Required
/docker/radarr
/docker/sonarr
/docker/lidarr
/docker/prowlarr
/docker/bazarr
/docker/readarr

Container Set Up

Next we are going to set up a ‘Project’ in Container Manager. Open up Container Manager and click on Project, then on the right-hand side click ‘Create’.

In the next screen we will set up our General Settings.

SectionSetting
Project Name:media-project
Path:/docker/projects/arrs-compose
Source:Create docker-compose.yml

Next we are going to drop in our docker compose configuration, copy all the code in the box below and paste it into line ‘1’

A couple of notes:

  • I personally use the Linuxserver images, so they are used below
  • I am pulling these images directly from Docker Hub and not lscr.io this is because container manager can’t check for updates on third party sites
  • You will see notes saying #change me we will do this on the next step, and you can remove the comments if you wish
YAML
services:
  sonarr:
    image: linuxserver/sonarr:latest
    container_name: sonarr
    environment:
      - PUID=1234 #CHANGE_TO_YOUR_UID
      - PGID=65432 #CHANGE_TO_YOUR_GID
      - TZ=Europe/London #CHANGE_TO_YOUR_TZ
      - UMASK=022
    volumes:
      - /volume1/docker/sonarr:/config
      - /volume1/data:/data
    ports:
      - 8989:8989/tcp
    network_mode: synobridge
    security_opt:
      - no-new-privileges:true
    restart: always
  
  lidarr:
    image: linuxserver/lidarr:latest
    container_name: lidarr
    environment:
      - PUID=1234 #CHANGE_TO_YOUR_UID
      - PGID=65432 #CHANGE_TO_YOUR_GID
      - TZ=Europe/London #CHANGE_TO_YOUR_TZ
      - UMASK=022
    volumes:
      - /volume1/docker/lidarr:/config
      - /volume1/data:/data
    ports:
      - 8686:8686/tcp
    network_mode: synobridge
    security_opt:
      - no-new-privileges:true
    restart: always   
    
  radarr:
    image: linuxserver/radarr:latest
    container_name: radarr
    environment:
      - PUID=1234 #CHANGE_TO_YOUR_UID
      - PGID=65432 #CHANGE_TO_YOUR_GID
      - TZ=Europe/London #CHANGE_TO_YOUR_TZ
      - UMASK=022
    volumes:
      - /volume1/docker/radarr:/config
      - /volume1/data:/data
    ports:
      - 7878:7878/tcp
    network_mode: synobridge
    security_opt:
      - no-new-privileges:true
    restart: always

  readarr:
    image: linuxserver/readarr:develop
    container_name: readarr
    environment:
      - PUID=1234 #CHANGE_TO_YOUR_UID
      - PGID=65432 #CHANGE_TO_YOUR_GID
      - TZ=Europe/London #CHANGE_TO_YOUR_TZ
      - UMASK=022
    volumes:
      - /volume1/docker/readarr:/config
      - /volume1/data/:/data
    ports:
      - 8787:8787/tcp
    network_mode: synobridge
    security_opt:
      - no-new-privileges:true
    restart: always

  bazarr:
    image: linuxserver/bazarr:latest
    container_name: bazarr
    environment:
      - PUID=1234 #CHANGE_TO_YOUR_UID
      - PGID=65432 #CHANGE_TO_YOUR_GID
      - TZ=Europe/London #CHANGE_TO_YOUR_TZ
      - UMASK=022
    volumes:
      - /volume1/docker/bazarr:/config
      - /volume1/data/:/data
    ports:
      - 6767:6767/tcp
    network_mode: synobridge
    security_opt:
      - no-new-privileges:true
    restart: always

I have split out Prowlarr as you may want this running on a VPN connection if your ISP blocks certain indexers. If not copy this section into your compose as well. See my Gluetun guides for more information on adding to a VPN.

YAML
  prowlarr:
    image: linuxserver/prowlarr:latest
    container_name: prowlarr
    environment:
      - PUID=1234 #CHANGE_TO_YOUR_UID
      - PGID=65432 #CHANGE_TO_YOUR_GID
      - TZ=Europe/London #CHANGE_TO_YOUR_TZ
      - UMASK=022
    volumes:
      - /volume1/docker/prowlarr:/config
    ports:
      - 9696:9696/tcp
    network_mode: synobridge
    security_opt:
      - no-new-privileges:true
    restart: always

Editing the Compose & Environment Variables

Please keep in mind that yaml formatting is very specific, so keep things lined up as per the original.

The compose contains all the Arr’s in the overall stack, you can remove any you don’t plan on using by deleting their entire section in the code.

We need to make some minor edits to the compose file in order to make sure the containers use the ‘dockerlimited’ user we created earlier and also let them know which timezone we are located. You will need to edit these in each section noted with ‘#change me’

VariableValue
PUID=Change it to the UID you obtained earlier in the first setup guides
PGID=Change it to the GID you obtained earlier in the first setup guides
TZ=You will need to change this line to your own timezone code – you can find the correct list of ones to use on wikipedia.org/wiki/List_of_tz_database_time_zones
Key Edits

Once you have made all your required edits click ‘Next’

Nothing to change on the next screen click ‘Next’ again..

On the final screen just click ‘Done’ and you will see a new window appear which will kick of downloading of the required container image and configure the containers.

This can take a couple of minutes to finish as all the images are downloaded and extracted. You should see ‘Code 0’ when it has finished.

Once finished you will see the Project is running with a green status.


Firewall Exceptions

(Skip if you don’t have the Firewall configured)

If you have enabled and configured the Synology Firewall you will need to create exceptions for any containers that have a Web UI or have any incoming or outgoing connections. This section covers the basics of how to add these. (Please note this is a generic section and will not show the specific ports used in this guide however it applies in the same way)

Also, I would like to refer people to the great guide on getting the Firewall correctly configured over on WunderTechs site.

Head into the Control Panel> Security > Firewall, from here click Edit Rules for the profile you set up when you enabled the Firewall.

Next click on Create and you will see the screen below. Source IP and Action will be automatically selected to All and Allow, I will leave it up to you as to your own preference on whether you want to lock down specific Source IPs from having access. In this example we will leave as All.

You will now choose ‘Custom‘ and then the Custom button

Now select Destination from the drop-down menu, most web based containers require TCP access but check the guide as it will show the port and protocol. Then add comma separated ports. Then press OK.

Click OK a couple of times to get back to the main screen. You will see by default the new rule is added to the bottom of the list. You must always have your Block All rule last in the list as the rules are applied top down so move your container up.

You have now completed the Firewall changes and can continue with the guide.

Containers are ready to use

You will now be able to access each of the containers on their respective ports.

AppAddress (not https://)
Lidarrhttp://NASIP:8686
Radarrhttp://NASIP:7878
Sonarrhttp://NASIP:8989
Readarrhttp://NASIP:8787
Bazarrhttp://NASIP:6767
Prowlarrhttp://NASIP:9696

Please see the next section which covers the ‘basics’ of each application setup as these usually catch people out. Full documentation can be found on https://wiki.servarr.com/

Key Settings within the Arrs

Settings > Media Management > Root Folders

Each of the Arr’s refer to the place(s) you keep your media as ‘Root Folders’. These are where the app will ultimately move your music/movies/books/shows once they finish downloading. Use the table below to set each of your folders correctly.

You will see other folders when you first browse for the /data folder it is located in the top level folder.

AppRoot Folder
Lidarr/data/media/music
Radarr/data/media/movies
Sonarr/data/media/tv
Readarr/data/media/books
BazarrNot required
ProwlarrNot required

Permission Issues (User ABC doesn’t have permission to access folder)

If you get this error when trying to add your Root folders check the following:

  • Your PUID and PGID are set correctly and the right way round in the compose
  • The ‘dockerlimited’ user has read and write permissions showing in the Control Panel > Shared Folders > Permissions
  • If the above has not worked go back to the User creation guide and see the section ‘Permission Fixes – only use if you have issues‘ for a couple of commands that will fix things.

Settings > Media Management > Remote Path Mappings

While most of the settings on this page are self-explanatory something that has caught people out is the Remote Path Mappings setting. If you are hosting all your services on the same NAS and in Docker do not add any settings here.

Settings > Download Client(s) > Add your Client > Host and Port

As our containers are all running on the ‘Synobridge’ custom bridge we can use the Gateway IP for this bridge for inter container networking. This will be 172.20.0.1 and the appropriate port for your Client assuming it is running in Docker!

You should now have the basics in place and I 100% recommend having a look at the previously mentioned https://wiki.servarr.com/ documentation as it will help you understand how the Arrs work.



Looking for some help, join our Discord community

If you are struggling with any steps in the guides or looking to branch out into other containers join our Discord community!

Buy me a beverage!

If you have found my site useful please consider pinging me a tip as it helps cover the cost of running things or just lets me stay hydrated. Plus 10% goes to the devs of the apps I do guides for every year.

Published inMedia Management 7.2

165 Comments

  1. Chris Mannix Chris Mannix

    Any specific reason why Readarr is the only one that is “develop” vs “latest” ? And is that also a reason why its not in your Watchtower portion for auto updates?

  2. muad'dib muad'dib

    I am trying to set this up from China and I’m pretty sure Docker Hub is blocked here. I do not have VPN set up on the NAS (and Im afraid Im too out of my depth to figure out how to do so from behind the Great Firewall). I had previously manually pulled each arr image .tar file and uploaded them into Container Manager so I could set up a container for each of them the old fashioned way. But then I found your guide for this project that would have all of them together nice and neatly. The project failed to run because it had trouble pulling the images and I’m assuming it’s because of the Great Firewall.

    My question is: Is it possible to amend the .yml compose text to make the project run from the images I have already locally uploaded rather than pulling them from online?

    Thanks for all your immensely helpful guides, you are a hero to many people!

    • Dr_Frankenstein Dr_Frankenstein

      Hi!

      Yes 100% change the image lines to the following, it will mean Container Manager won’t alert you for image updates but if you also use Watchtower it will handle that. This uses Linuxservers’ own site.

      lscr.io/linuxserver/radarr:latest
      lscr.io/linuxserver/sonarr:latest
      lscr.io/linuxserver/lidarr:latest
      lscr.io/linuxserver/bazarr:latest
      lscr.io/linuxserver/readarr:latest
      lscr.io/linuxserver/prowlarr:latest

  3. badger badger

    Thanks for this guide , it’s great! I’m getting stuck though adding root folders in the arrs. Folder (any from your table) is not writable by user abc

    Do I change the owner to one of the created users?

    • Dr_Frankenstein Dr_Frankenstein

      Hey – Make sure your PUID and PGID are both correct and the right way around, if they are check that in File Station that the dockerlimited user is down as an owner of the folder.. Failing that jump back to the User creation guide and use the permissions fix 🙂

      • badger badger

        Thanks so much. The root cause seemed to be that I already had shared folders from my plex set-up that was already in place. I had to give access to all of those too

  4. gabri gabri

    Thank you for this amazing guide. I was wondering how i would be able to add another project and container for another instance of Sonarr, purely for anime. I attempted to create a new project with the code above changing folders/ports, names.

    • Dr_Frankenstein Dr_Frankenstein

      Essentially – make a copy of the Sonarr section and give the container a new name, new path for the config folder and finally change the left external port to a different one.

  5. Helft Helft

    Just realised I’m an absolute idiot and didn’t use the UID for the dockerlimited user… Been running Arr’s for over a year now not on this correct user – any issue if I rebuild with the dockerlimited UID or will it break things?

    • Dr_Frankenstein Dr_Frankenstein

      You may just need to adjust the permissions on all the files using File Station.

      • Helft Helft

        Thank Doc, I’ve just gone through everything again – looks like all ok and the correct UID was actually used; my notes was telling me otherwise! Appreciate your work brother.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

drfrankenstein.co.uk – writing Synology Docker Guides since 2016 – Join My Discord!