|New guide released||06/12/2021|
|Added note around Ryzen based Synology models||27/12/2021|
|Updated Environment Variables to ensure server is updating to latest version||02/02/2022|
|Added Timezone Variable to the compose||22/05/2022|
|Amended the mount path for media||12/08/2022|
In this guide I am going to take you through the setup of Plex in Docker using Docker Compose.
As of writing the Synology UI does not have the capability of passing through specific hardware to a container, this means we will need to set up Plex via SSH (terminal). However, don’t freak out as it’s not that difficult!
You will only benefit from hardware transcoding if you have an active Plex Pass either monthly or lifetime. if you don’t have one you can either follow this guide or jump over to the non hardware transcoding version.
Does my Synology support Hardware Transcoding?
Before we do anything else, you need to make sure your model of Synology has Intel Quick Sync. You need to do a quick lookup via the two pages below, on the first one, find your NAS model then on the Intel site lookup it’s CPU specifications. (If you are using a new model with a Ryzen v1500b it does not have hardware transcode capabilities)
For example the DS920+ has an Intel Celeron j4125
If we then look up the j4125 on the Intel site we can see it is capable of Quick Sync
If you find that Quick Sync is not available on your model you can jump back over to the standard guide here
As usual, it’s important you complete the two proceeding guides which will get your folder structure and docker, user setup.
We will be using Docker Compose to set up the Plex container. In a nutshell we will be creating a text file (YAML formatted) which tells Docker exactly how we want to set up a specific container.
The next steps can be done either using a code/text editor such as Notepad++ or to keep things simple for this guide we will be using the Synology Text Editor which can be installed from the Package Center.
Open up Text Editor and click on File then New to start a new file.
You can now copy and paste the details below into the new text file, it is important you don’t change the spacing as YAML has to be formatted correctly in order to be read by Docker Compose.
version: "3.8" services: plex: image: lscr.io/linuxserver/plex container_name: plex network_mode: host environment: - PUID=YOURID - PGID=YOURGID - VERSION=latest - TZ=YOURTIMEZONE volumes: - /volume1/docker/plex:/config - /volume1/data/media:/data/media devices: - /dev/dri:/dev/dri restart: unless-stopped
We need to make some changes in order for the container to have the correct permissions to save its configuration files and to have access to your media.
PUID and PGID
When you created your docker user you would have noted down these IDs add these to the compose file in the ‘environment:’ section
We can now pass through our file paths into the container they are mounted using the volume’s section of the compose file.
I have pre-filled this section to pass the correct paths, the only thing that you may need to change is the /volume1/ if your file paths are on a different volume.
The timezone variable will tell the container where you are in the world meaning your logs and scheduled tasks will run at the correct times. A list of timezones with the correct formatting can be found here wikipedia.org/wiki/List_of_tz_database_time_zones
Your final file should look similar to the one shown below.
Saving the Compose File
We now need to save this file into our docker share.
Click on File then Save As, navigate to the ‘Docker’ share and create a new folder called ‘plex’ (lower case)
You need to change the ‘File name’ to plex.yml and save it in the ‘plex’ folder
SSH and Docker-Compose
It’s time to get logged into your Diskstation via SSH, you can do this in the same way as when you obtained your IDs in the ‘Setting up a restricted Docker user‘ guide.
Once you have logged in you will need to give 2 commands, you can copy and paste these one at a time — you will need to enter your password for the command starting with ‘sudo’
First we are going to change directory to where the plex.yml is located, type the below and then press enter.
Then we are going to instruct Docker Compose to read the file we created and complete the set-up of the container. Again type the below and press enter.
sudo docker-compose -f plex.yml up -d
When the command has completed you should be able to see Plex running in the list of containers in the Synology GUI.
Plex Initial Setup
After a few minutes you should be able to access the server and go through the Plex setup by going to the IP of your NAS in your browser followed by port 32400/web/
You will be asked to sign in or sign up for an account if you don’t have one already.
You should now be able to add your media which will be in the /data/media folder within Plex
Once you have got to the main Plex interface make sure you go into the settings and turn on
- Enable HDR tone mapping
- Use hardware acceleration when available
That’s it you are all setup. When a new server update is available you will just need to restart the container, and it will automatically download the latest update.
Throw me some bits or buy me a coffee?
If you have found my site useful please consider pinging me a tip as it helps cover the cost of running the site, you can even buy me a coffee 🙂