NZBGet in Container Manager on a Synology NAS

What is NZBGet?

NZBGet is an efficient, open-source Usenet software designed for downloading binary content from Usenet newsgroups. No matter how simple or complex your setup is, NZBGet is a lightweight application that has been optimized for speed and performance on any device.

Let’s Begin

In this guide I will take you through the steps to get NZBGet up and running in Container Manager. We will be using the new Projects (Docker Compose) feature to get this running as it will save you time vs manual setup using the normal UI

In order for you to successfully use this guide please complete the three preceding guides

• Docker, Memory Recommendations and Limitations
  
• Step 1: Directory Setup Guide
• Step 2: Setting up a restricted Docker user
• Step 3: Setting up a Docker Bridge Network

Folder Setup

Let’s start by getting some folders set up for the containers to use. Open up File Station create the following.

/docker/projects/nzbget-compose
/docker/nzbget

Container Manager

Next we are going to set up a ‘Project’ in Container Manager. Open up Container Manager and click on Project then on the right-hand side click ‘Create’.

In the next screen we will set up our General Settings, enter the following:

Next we are going to drop in our docker compose configuration, copy all the code in the box below and paste it into line ‘1’ just like the screenshot.

services:
  nzbget:
    image: nzbgetcom/nzbget:latest
    container_name: nzbget
    environment:
      - PUID=1234 #CHANGE_TO_YOUR_UID
      - PGID=65432 #CHANGE_TO_YOUR_GID
      - TZ=Europe/London #CHANGE_TO_YOUR_TZ
      - NZBGET_USER=CHANGEME #WEBUI LOGIN
      - NZBGET_PASS=CHANGEME #WEBUI PASSWORD
    volumes:
      - /volume1/docker/nzbget:/config
      - /volume1/data/usenet:/data/usenet
    ports:
      - 6789:6789/tcp
    network_mode: synobridge
    security_opt:
      - no-new-privileges:true
    restart: always

Environment Variables

We are now going to amend some key variables to make sure the container has access to our folders and also knows where we are in the world. Don’t change any other settings other than those I mention.

Once you have made the edits you can click ‘Next’

You do not need to enable anything on the ‘Web portal settings’ screen click ‘Next’ again.

On the final screen click ‘Done’ which will begin the download of the container images and once downloaded they will be launched!

The image will now be downloaded and extracted. You should see ‘Code 0’ when it has finished.

Firewall Exceptions

(Skip if you don’t have the Firewall configured)

If you have enabled and configured the Synology Firewall you will need to create exceptions for any containers that have a Web UI or have any incoming or outgoing connections.

Make a note of the ports used in the compose section of the guide, these will be the ones you need to create exceptions for.

(Please note this is a generic section and will not show the specific ports used in this guide however it applies in the same way)

Also, I would like to refer people to the great guide on getting the Firewall correctly configured over on WunderTechs site.

Head into the Control Panel> Security > Firewall, from here click Edit Rules for the profile you set up when you enabled the Firewall.

Next click on Create and you will see the screen below. Source IP and Action will be automatically selected to All and Allow, I will leave it up to you as to your own preference on whether you want to lock down specific Source IPs from having access. In this example we will leave as All.

You will now choose ‘Custom‘ and then the Custom button

Now select Destination from the drop-down menu, most web based containers require TCP access but check the guide as it will show the port and protocol. Then add comma separated ports. Then press OK.

Click OK a couple of times to get back to the main screen. You will see by default the new rule is added to the bottom of the list. You must always have your Block All rule last in the list as the rules are applied top down so move your container up.

You have now completed the Firewall changes and can continue with the guide.

Some final steps

NZBGet will now be running on port 6789 you can connect to it by going to the IP address of your NAS with that port

e.g. 192.168.0.40:6789

Once you have logged in with the username and password you specified you need to change the default download path. Go into Settings > PATHS as amend as per the table / screenshot.

You are now configured to get downloads working, there are quite a few options in the configuration sections of the app you can find explanations of the settings in the official documentation

https://nzbget.com/documentation/

Looking for some help, join our Discord community

If you are struggling with any steps in the guides or looking to branch out into other containers join our Discord community!

Buy me a beverage!

If you have found my site useful please consider pinging me a tip as it helps cover the cost of running things or just lets me stay hydrated. Plus 10% goes to the devs of the apps I do guides for every year.