Please note if you are using DSM7.2 or higher you should use the Container Manager version of this guide from the menu.
This guide has reached the end of its updates as most people are now on the latest DSM update - This guide is correct as of 08/12/2023 however no further updates will be added.
Important or Recent Updates
Historic Updates | Date |
---|---|
New guide | 23/09/2022 |
Fixed a typo in the yaml ‘vpngluetun’ to ‘gluetun’ | 26/09/2022 |
Added the synobridge network to the VPN container | 07/10/2022 |
Added depends_on to the compose file to help with the container stack coming online at boot. | 18/10/2022 |
Removed requirement to use VPN Package | 06/11/2022 |
Amended compose file for enabling or disabling the built-in proxy | 09/12/2022 |
Added note to the FAQ about how to Update the containers | 06/01/2023 |
Added additional step to force qBittorrent to use the tun0 interface | 06/02/2023 |
Added firewall exception for network subnet | 22/02/2023 |
Added firewall exception for ‘synobridge’ subnet as this seems to be yet another random thing that works for some and not others! | 31/03/2023 |
Compose version number removed and image updated in line with amendment | 09/04/2023 |
Amended the path to save the compose file – this is for security, so the container has no access to the file contents. | 14/04/2023 |
Added watchtower labels to the compose to allow updates and changed the proxies to off by default | 06/05/2023 |
Removed the Watchtower ‘Depends On’ Labels as they do not successfully update the GlueTUN container. Added an Exclusion label to the GlueTUN container, so it can just be manually updated. | 11/05/2023 |
Update includes: Firewall Input Ports for when your provider offers port forwarding, also a note in relation to volumes and added PUID/PGID settings for GlueTUN | 14/06/2023 |
Update for Wireguard Kernel Module Install which reduces overall CPU usage for Wireguard connections Please note if you previously followed this guide you can follow the new section to update your existing set-up. Added Health checks to dependent containers | 25/09/2023 |
Updated with new steps to obtain and change WebUI password | 21/11/2023 |
Issue with passwords has been fixed in 4.6.2 so removed tty line from yaml | 29/11/2023 |
What are qBittorrent and GlueTUN?
qBittorrent is a torrent downloader and GlueTUN is the Docker container that has pre-configured VPN connections for numerous VPN providers.
Before you start check the GlueTUN Wiki to see if your provider is on the supported list on the left-hand side.
Also, if you are yet to choose a provider have a look at the Reddit list of recommended suppliers as could save you a headache when trying to seed. I currently use AirVPN which has nice easy port forwarding unlike some others. This is my affiliate link if you fancy signing up.
Let’s Begin
In this guide I will take you through the steps to get qBittorrent up and running in Docker and a separate GlueTUN VPN container. By having a separate container for the VPN connection we can use it in the future for other applications such as Prowlarr, this is useful if you have torrent indexers blocked in your country.
As the Synology DSM Docker GUI does not support some of the functions we need for this tutorial we will be using Docker Compose. This is not as complicated as it might seem!
In order for you to successfully use this guide please complete the three preceding guides
- Step 1: Directory Setup Guide
- Step 2: Setting up a restricted Docker user
- Step 3: Setting up a Docker Bridge Network
Folder Setup
Let’s start by getting a couple of folders set up for the containers to use. Open up Filestation and within the /docker share create a folder called ‘qbittorrent’ and one called ‘gluetun’
![](https://drfrankenstein.co.uk/wp-content/uploads/2022/09/image-28.png)
Setting up the start up script
Open up Control Panel and then click on Task Scheduler
![](https://drfrankenstein.co.uk/wp-content/uploads/2022/07/image-28.png)
Next click on Create, Triggered Task then User Defined Script.
![](https://drfrankenstein.co.uk/wp-content/uploads/2022/07/image-29.png)
Now enter a name for the script – you can call it anything you like. The User must be ‘root’ and ‘Boot-up’ for the Event.
![](https://drfrankenstein.co.uk/wp-content/uploads/2022/07/image-30.png)
On the Task Settings tab copy and paste the code below in the ‘User-Defined script’ section. It will look like screenshot.
#!/bin/sh -e
insmod /lib/modules/tun.ko
![](https://drfrankenstein.co.uk/wp-content/uploads/2022/08/image-6.png)
You can now press OK and agree to the warning message. Next run the script which will enable the TUN device.
![](https://drfrankenstein.co.uk/wp-content/uploads/2022/11/image.png)
You can now move on to the next step.
Firewall (Optional Step if you have the Firewall Enabled)
If you have the Synology Firewall enabled and configured to block outgoing connections you will need to do this step. Otherwise, you will have issues with the VPN connecting to your provider. (please note the screenshot below does not show all the other rules you would normally have enabled)
Go into Control Panel > Security > Firewall
![](https://drfrankenstein.co.uk/wp-content/uploads/2022/03/image-22-1024x580.png)
Click on Edit Rules and in the screen that appears click on ‘Create’
![](https://drfrankenstein.co.uk/wp-content/uploads/2022/03/image-24.png)
In the first screen select ‘Custom’
![](https://drfrankenstein.co.uk/wp-content/uploads/2022/03/image-25.png)
On the next screen we select the Type as ‘Destination Port’ and Protocol as ‘All’. In this example I am going to open up both 1194 and 1195 as some providers use UDP and some TCP and these are the most commonly used ports.
![](https://drfrankenstein.co.uk/wp-content/uploads/2022/07/image-26.png)
Click on OK and Apply the rule, and leave the ‘Source IP’ and ‘Action’ to their defaults on the original screen.
Wireguard Kernel Module
(Recommended for Performance & Reduced CPU Resource)
The default Gluetun Wireguard setup uses a ‘Userspace’ implementation of Wireguard which normally should not use much from a CPU resource perspective. However, on Synology it tends to require high CPU utilisation. For example a 40MiB download via qBittorrent uses up to 176% in CPU (1.7 Cores) on my 1821+.
By installing the appropriate Kernel Module this reduces down to 1 or 2% which over time would add up from an electric usage perspective and free up the CPU for other tasks.
![](https://drfrankenstein.co.uk/wp-content/uploads/2023/09/beforemodule.png)
![](https://drfrankenstein.co.uk/wp-content/uploads/2023/09/aftermodule.png)
BlackVoid.club have put together a Kernel Module for Synology which allows Gluetun to use the lower level Kernel to perform Wireguard duties make sure you drop them a thanks as this would not be possible without them!
While on first glances it looks like a long installation process the page details a number of methods. I recommend having a read taking note of warnings and also if you want to build your own model it tells you how.
The TLDR is below.
Step 1 – Find your model of NAS under the correct DSM version section (If you are following this guide it will be 7.0/1) and download the pre compiled .spk file
Step 2 – Head into Package Manager and click ‘Manual Install’ on the top right and install the .spk file and untick the box to run after install
Step 3 – Reboot (Not always required for DSM7.1 and lower)
Step 4 – SSH Into your NAS (Just like in the User Setup guide) and elevate yourself to root by typing sudo -i
and entering your password
Step 5 – Enter this command and press enter to start up the module /var/packages/WireGuard/scripts/start
You should now be able to see the WireGuard package running in Package Manager. Please note while I will try my best to support in relation to this module I may have to refer you on if it is a specific technical issue.
When you have GlueTUN running check the log for this line [wireguard] Using available kernelspace implementation, and you know it is working.
On to the next part.
Docker Compose
Next we are going to create a Docker Compose file, this is used to tell Docker how to set up our containers with all the variables we require that are not available in the DSM GUI.
You can edit this file in a number of ways, but to keep the guide OS-agnostic we will be using the Synology Text Editor package which can be installed via Package Center.
Open up Text Editor and create a new file then, copy and paste the information below into the file.
You will notice that we have some additional ports assigned for a http proxy and Shadowsocks Proxy – this means you can direct traffic from other devices or applications on your network through the container! If you do not want to use this functionality remove those ports.
services:
gluetun:
image: qmcgaw/gluetun
container_name: gluetun
cap_add:
- NET_ADMIN
devices:
- /dev/net/tun:/dev/net/tun
ports:
- 8888:8888/tcp # HTTP proxy
- 8388:8388/tcp # Shadowsocks
- 8388:8388/udp # Shadowsocks
- 8090:8090 # port for qbittorrent
volumes:
- /volume1/docker/gluetun:/gluetun
environment:
- PUID=1234 #CHANGE_TO_YOUR_UID
- PGID=65432 #CHANGE_TO_YOUR_GID
- TZ=Europe/London #CHANGE_TO_YOUR_TZ
- VPN_SERVICE_PROVIDER=NAMEOFYOURPROVIDER
- VPN_TYPE=openvpn
- OPENVPN_USER=VPNUSERNAME
- OPENVPN_PASSWORD=VPNPASSWORD
- SERVER_COUNTRIES=VPNSERVERCOUNTRY
- HTTPPROXY=off #change to on if you wish to enable
- SHADOWSOCKS=off #change to on if you wish to enable
- FIREWALL_OUTBOUND_SUBNETS=172.20.0.0/16,192.168.0.0/24 #change this in line with your subnet see note on guide.
# - FIREWALL_VPN_INPUT_PORTS=12345 #uncomment this line and change the port as per the note on the guide
network_mode: synobridge
labels:
- com.centurylinklabs.watchtower.enable=false
restart: unless-stopped
qbittorrent:
image: linuxserver/qbittorrent:latest
container_name: qbittorrent
environment:
- PUID=1234 #CHANGE_TO_YOUR_UID
- PGID=65432 #CHANGE_TO_YOUR_GID
- TZ=Europe/London #CHANGE_TO_YOUR_TZ
- WEBUI_PORT=8090
volumes:
- /volume1/docker/qbittorrent:/config
- /volume1/data/torrents:/data/torrents
network_mode: service:gluetun # run on the vpn network
depends_on:
gluetun:
condition: service_healthy
restart: unless-stopped
You can change the formatting to YAML in the bottom right of the editor to make it easier to read.
![](https://drfrankenstein.co.uk/wp-content/uploads/2023/04/image-6.png)
Firewall Subnet
You will see an environment variable in the yml file called FIREWALL_OUTBOUND_SUBNETS=172.20.0.0/16,192.168.0.0/24
The first part 172.20.0.0/16 don’t edit this, the second IP after the , change as per below.
This IP address is easy to figure out. If you NAS IP is 192.168.1.27 your subnet is 192.168.1.0/24 (notice I just changed the last number to 0) This variable allows any containers connected via the VPN access to your local network.
Firewall Input Ports
This part is # commented out by default, if your provider offers port forwarding remove the # from the start of the line and change the port number in line with the one provided to you. This will also be the port used within qBittorrent and will help overall connectivity. (Note if you are using Proton VPN see the FAQ for an important extra step now!)
Volumes
By default, I have assumed you have your config files stored on /volume1 if these are located on another volume amend this line accordingly.
Watchtower Exclusion
You don’t need to change this, I added a label to avoid Watchtower automatically updating the GlueTUN container as it will always break the overall project which can be inconvenient if you are not around to fix it. You can update the container using the mini guide on the left menu of the site.
labels:
- com.centurylinklabs.watchtower.enable=false
Important – Provider Specific Edits
Next up we will need to make some edits to the Environment Variables section of the compose in line with what is required for your specific provider. Open up the GlueTun Wiki and in the list find your provider.
![](https://drfrankenstein.co.uk/wp-content/uploads/2023/07/image-1024x529.png)
For example in the Privado section (screenshot below) it has the variables required to make a successful connection, The ‘Required environment variables’ section will get you connected to a random server of the containers choosing.
You can add the ‘Optional environment variables’ parameters in order to select a specific server or range of servers. These are found on the same page.
(Pay close attention to your providers amendments as often people are caught out by using the incorrect settings such as SERVER_COUNTRIES when it should be SERVER_REGIONS etc)
If your provider is not supported, you can make a request on GitHub to add it, I do not currently have custom providers covered in this guide, feel free to jump on Discord / email me for help here.
Also note that some providers don’t like you having special characters in the password you will generally spot this in the log with AUTH errors.
This will be very similar across all the providers built in with some slight variances.
![](https://drfrankenstein.co.uk/wp-content/uploads/2023/07/image-1-1024x649.png)
Once you have checked for your provider, make the appropriate edits to the compose accordingly.
In addition to the edits we just made there are a couple more in the table below, do these in the sections I have pre-filled
Variable | Value |
---|---|
PUID | (required) The UID you obtained in the user setup guide |
PGID | (required) The GID you obtained in the user setup guide |
TZ | (required) Your timezone wikipedia.org/wiki/List_of_tz_database_time_zones |
You can now save this compose file in /docker and call it qbittorrentvpn.yml
SSH and Docker-Compose
It’s time to get logged into you Diskstation via SSH, you can do this in the same way as when you obtained your IDs in the ‘Setting up a restricted Docker user‘ guide.
![](https://drfrankenstein.co.uk/wp-content/uploads/2021/12/image-22.png)
Once you have logged in you will need to give 2 commands, you can copy and paste these one at a time — you will need to enter your password for the command starting with ‘sudo’
First we are going to change directory to where the qbittorrentvpn.yml is located, type the below and then press enter.
cd /volume1/docker
Then we are going to instruct Docker Compose to read the file we created and complete the set-up of the container. Again type the below and press enter.
sudo docker-compose -f qbittorrentvpn.yml up -d
When the command has completed you should be able to see both qBittorrent and the VPN container running in the list of containers in the Synology GUI.
Error: “gluetun is unhealthy”
At this stage if you receive an error relating to GlueTUN being unhealthy there is likely an error in the config file, this usually relates to the provider specific elements. If you check the logs for the GlueTUN container it will tell you why it couldn’t connect. If you get stuck drop me a comment with a copy of the logs via https://paste.drfrankenstein.co.uk.
Changing the default WebUI login and password
If you skip this step you won’t be able to log in.
Now the container has started open it in the Docker UI and go to the Log tab. Within the logs you will see the login details
![](https://drfrankenstein.co.uk/wp-content/uploads/2023/11/image-8-1024x258.png)
Now before doing any more of the guide go to the Web UI by going to the IP of your NAS followed by port 8090 and log in. Then on the WebUI tab change the defaults to your own and save them.
![](https://drfrankenstein.co.uk/wp-content/uploads/2023/11/image-9.png)
Now continue on..
Final qBittorrent steps
As we have used /data/torrents as the mount point for our downloads we need to make sure qBittorrent uses this same file path.
We need to change the file paths by editing the qBittorrent config file, before doing this stop both of the containers.
Go back into DSM and open Text Editor, browse to /docker/qbittorrent/qbittorrent and open the qBittorrent.conf then edit the file in line with the table below, once amended save the changes.
Original Value | New Value |
---|---|
Session\DefaultSavePath=/downloads/ | Session\DefaultSavePath=/data/torrents/completed |
Session\TempPath=/downloads/incomplete/ | Session\TempPath=/data/torrents/incoming/ |
Downloads\SavePath=/downloads/ | Downloads\SavePath=/data/torrents/completed |
Downloads\TempPath=/downloads/incomplete/ | Downloads\TempPath=/data/torrents/incoming/ |
You can now bring the containers back up again by repeating the steps in the SSH and Docker Compose section above.
Once the containers are running you can log into the Web UI by going to the IP of your NAS followed by port 8090
e.g. 192.168.0.30:8090
Log in with the username and password you created earlier.
![](https://drfrankenstein.co.uk/wp-content/uploads/2022/05/image-5.png)
Now you are in the UI click on settings cog at the top of the screen, we are going to change one more directory which is the watched folder to /data/torrents/watch. You can also turn on the option ‘keep incomplete torrents in:’ which should already have /data/torrents/incoming’ prefilled.
![](https://drfrankenstein.co.uk/wp-content/uploads/2022/06/image-41.png)
Next we are going to set a command to run when each torrent finishes to automatically extract any .rar files (Note if you have any issues with this I would recommend using Unpackerr the guide is on the menu)
Scroll down in the options to the ‘Run external program on torrent completion’ and enter the below, it tells qbittorrent to run unrar and extract the file to the same save path as the original file. This will not delete anything, so you can continue seeding.
unrar x "%D/*.r*" "%D/"
![](https://drfrankenstein.co.uk/wp-content/uploads/2022/06/image-20.png)
Advanced Network Settings
The last step is to tell qBittorrent to only use the tun0 interface for its traffic, go to the Advanced tab then from the ‘Network Interfaces’ drop down select ‘tun0’ and click Apply
![](https://drfrankenstein.co.uk/wp-content/uploads/2023/02/image-1.png)
I am not going to walk through all the other settings as you can customise these as you wish.
That’s it you are completely set up, I recommend having a quick read through the FAQ as it covers some questions you may have!
FAQs
Q: How can I update the GlueTUN containers?
A: See the Updating Containers section on the menu for a specific guide for GlueTUN
Q: How can I be sure the VPN connection is working?
A: Go to the TorGuard Check My Torrent IP site, right-click on the Green banner and copy the link (it’s a Magnet link) Then add this link into qBittorrent and start the torrent. Keeping the site open after a few seconds the site will show the IP address of the connection it finds. This will be of the VPN provider not your home IP. (Please note the torrent doesn’t actually download anything it’s purely doing an IP check)
Q: I tried to start Deluge / qBittorrent manually, and it says ‘Container must join at least one network’
A: This is due to the Synology Docker GUI not understanding that the container will be on the VPNs ‘network’. You will either need to start the container again via SSH or you can set up a manually triggered script via Task Scheduler you will only need to do use this if you ever stop the container.
Head into Control Panel and go to Task Scheduler, Click Create > Triggered Task > User Defined Task
Section | Setting |
---|---|
Task Name | DockerVPNRestart |
User | Root |
Enabled | Leave Unticked |
In the ‘Task Settings’ tab enter the following and then click Save
docker-compose -f /volume1/docker/qbittorrentvpn.yml down
wait
docker-compose -f /volume1/docker/qbittorrentvpn.yml up -d
Q: Everything seems to be connected but nothing is downloading.
Are you using TorGuard – If so they block torrents on their US servers. Change to another country – Also while you are at it, you may need to configure port forwarding in your TorGuard account.
Try grabbing the Ubuntu torrent as that is a sure fire way of testing as generally it has over 3k seeds.
Q: My container doesn’t seem to start on a reboot even with the TUN script.
A: I have seen this a few times and usually relates to the VPN not completing its connection fast enough before containers using the VPN start. You can try setting an additional startup script by doing the following.
Head into Control Panel and go to Task Scheduler Click Create > Triggered Task > User Defined Task
Section | Setting |
---|---|
Task Name | DockerVPNBootUp |
User | Root |
Event | Boot Up |
Pre Task | Select the TUN script from the drop-down |
In the ‘Task Settings’ tab enter the following and then click Save
sleep 120
docker-compose -f /volume1/docker/qbittorrentvpn.yml down
wait
docker-compose -f /volume1/docker/qbittorrentvpn.yml up -d
Proton VPN Port Forwarding Extra Step
Proton doesn’t allow you to choose your own port for port forwarding, so we need to add another container to the compose in order for this to be automatically updated for us. (Please note I am unable to test this personally it is based on Feedback via our Discord channel)
First don’t uncomment this line in the compose leave it disabled# - FIREWALL_VPN_INPUT_PORTS=40312
Next copy the code below to bottom of the compose file and then amend the following only leave the other options.
TZ=
#ENTER YOUR TIMEZONEQBITTORRENT_SERVER
= NAS IP or 172.20.0.1QBITTORRENT_USER
=admin (change to the username you will be using later for qbit)QBITTORRENT_PASS
=adminadmin (change to the password you will be using later for qbit)
Once added continue with the guide 🙂
qbittorrent-natmap:
# https://github.com/soxfor/qbittorrent-natmap
image: ghcr.io/soxfor/qbittorrent-natmap:latest
container_name: qbittorrent-natmap
restart: unless-stopped
volumes:
- /var/run/docker.sock:/var/run/docker.sock:ro
environment:
- TZ=Europe/London #CHANGE_TO_YOUR_TZ
- QBITTORRENT_SERVER= #NAS IP or 172.20.0.1
- QBITTORRENT_PORT=8090
- QBITTORRENT_USER=admin
- QBITTORRENT_PASS=adminadmin
# - VPN_GATEWAY=
# - VPN_CT_NAME=gluetun
# - VPN_IF_NAME=tun0
# - CHECK_INTERVAL=300
# - NAT_LEASE_LIFETIME=300
network_mode: service:gluetun
depends_on:
qbittorrent:
condition: service_started
gluetun:
condition: service_healthy
Q: How can I add additional services to the VPN container?
A: Adding additional containers to the VPN network is very easy. As you can see in the example below I have added Prowlarr to the bottom of the compose. The only amendments are that the ‘network_mode’ uses the Gluetun container and the ports for Prowlarr have been moved up to the Gluetun containers ports section.
Also see the separate Prowlarr guide on the left menu for setting up FlareSolver (In the Extras section)
- 9696:9696 # add this to the ports section of GlueTUN
#add the below to the bottom of the compose
linuxserver-prowlarr:
image: linuxserver/prowlarr:latest
container_name: prowlarr
environment:
- PUID=1234 #CHANGE_TO_YOUR_UID
- PGID=65432 #CHANGE_TO_YOUR_GID
- TZ=Europe/London #CHANGE_TO_YOUR_TZ
volumes:
- /volume1/docker/prowlarr:/config
network_mode: service:gluetun # run on the vpn network
depends_on:
gluetun:
condition: service_healthy
restart: unless-stopped
Q: I Get a long error mentioning OCI when bringing up the containers.
A: Stop both the containers from the Docker UI and delete them, run the command again, and it should start up fine. If this still happens double check you have set your VPN providers settings correctly.
More will be added as questions come up
Looking for some help, join our Discord community
If you are struggling with any steps in the guides or looking to branch out into other containers join our Discord community!
Buy me a beverage!
If you have found my site useful please consider pinging me a tip as it helps cover the cost of running things or just lets me stay hydrated. Plus 10% goes to the devs of the apps I do guides for every year.
Thanks for the guides, these are awesome!
I keep running into an error with the gluetun conatainer. It shows up with warnings about keysize, link-mtu, and comp-izo being used inconsistently. I also saw a note in the log that my credentials might be wrong but I’m not sure which credentials it’s referring to.
Any idea what I’m doing wrong? I can provide my log and yml file.
Hey some warnings are normal depending on your provider.
You can ping me you logs via my Help Me! page – upload them here and copy the link https://paste.drfrankenstein.co.uk
Here are my logs, I’ve restarted several times with the same issues: https://paste.drfrankenstein.co.uk/?92d1cdc566aabeb0#gcFnnavRFznBovqowfqvftkUjmW3vcGRHpEvAeSpeRh
My yml code:
https://paste.drfrankenstein.co.uk/?0c3f2bf0146af46e#JAKzq8gMLrpMHFmeFER1xxoJZFQ38QDwmq9BPBQptuwc
It’s not just warnings, gluegun isn’t working at all. I can’t connect to it through qbittorrent and qbittorrent just stalls at 0%.
If I build qbittorrent without the VPN to test, can I add gluegun later?
Also, thanks again for all your help!
Hey so make sure you are using the correct login credentials as they are different to your login to the website, follow the second link below when you are logged in.
https://github.com/qdm12/gluetun/wiki/ProtonVPN
https://account.proton.me/u/0/vpn/OpenVpnIKEv2
Yup, the OpenVPN / IKEv2 username and password strings are what I’ve been using.
Though I didn’t download any of the configuration files, was I supposed to?
I probably missed a step somewhere. I’m using a free Proton account for now, could that be the issue?
Maybe the free account is limited in some way? It’s got to be an auth issue for it to be returning that error. However, the auth might be right, but you don’t have the right account type?
I say it every time, but you are amazing. I’ve gotten everything working from your guides and I wouldn’t haven been able to do it without you. I do have one scenario left I’m trying to figure out. If I lose power in my house while out of town I can WOL, everything boots fine however the qbit image doesn’t start without the sudo command each time.
Is there anyway I would be able to run that command remotely if I was out of town?
Hey, yes check the FAQ, you can setup a start up task so the SSH commands will run 30 seconds after boot up.
Hi there,
I followed this install once and everything worked great. I ended up needed to do a DSM reset, and now when I follow this setup guide I get the error:
Service ‘qbittorrent’ uses the network stack of service ‘gluetun’ which is undefined.
Gluetun appears to be connecting via ‘synobridge’. Any idea what would cause this?
Are you starting the containers with the SSH docker compose command and receiving the error in the SSH session?
Make sure qbit has this line
network_mode: service:gluetun # run on the vpn network
And that you are not missing this from the Gluetun section
container_name: gluetun
Thanks for the fast response.
Yes, this is all coming though SSH. As soon as I try to execute running the docker-compose.yml it returns this line about being undefined.
I checked and also tried another fresh install and I am still getting the same error (my glutun does have the container name tag, as well as the network_mode= service:gluetun in my qbit compose info.
Could you share you yml file please https://paste.drfrankenstein.co.uk and then paste the link back here in the comments (remove your login/wireguard credentials first!)
No problem!
https://paste.drfrankenstein.co.uk/?863663e06188a4cd#2PwwM7sGq4AAjtzneUCSLxXkcN8sn8TMLGK8LLoEBTjb
My only edits to your compose file is adding ‘/appdata/’ in the path (since everything was set up following TraSH guides atomic/hardlink guide a while ago).
Thanks again for your help with troubleshooting this with me.
How bizarre your yml looks perfect. Can you see if the error changes if you alter the names of the Gluetun container…
services:
vpngluetun:
image: qmcgaw/gluetun
container_name: vpngluetun
network_mode: service:vpngluetun
I can’t get over this error:
Creating gluetun … done
Creating qbittorrent … error
ERROR: for qbittorrent Cannot start service qbittorrent: Container cf034138ff1127d34d5c3c146aeb603f854e0b50c940c3721a11a5d142e206b4 is restarting, wait until the container is running
I tried various stuff: different VPNs, disabled Synology firewall, etc.
If I check the gluten logs I get this that is not very useful:
INFO [routing] default route found: interface eth0, gateway 172.20.0.1, assigned IP 172.20.0.2 and family v4
INFO [routing] local ethernet link found: eth0
INFO [routing] local ipnet found: 172.20.0.0/16
INFO [firewall] enabling…
INFO [firewall] enabled successfully
ERROR reading servers from file: decoding servers: unexpected end of JSON input
INFO Shutdown successful
My yml file is the following:
services:
gluetun:
image: qmcgaw/gluetun
container_name: gluetun
cap_add:
– NET_ADMIN
devices:
– /dev/net/tun:/dev/net/tun
ports:
– 8888:8888/tcp # HTTP proxy
– 8388:8388/tcp # Shadowsocks
– 8388:8388/udp # Shadowsocks
– 8090:8090 # port for qbittorrent
volumes:
– /volume1/docker/gluetun:/gluetun
environment:
– VPN_SERVICE_PROVIDER=nordvpn
– VPN_TYPE=openvpn
– OPENVPN_USER=[REDACTED]
– OPENVPN_PASSWORD=[REDACTED]
– SERVER_REGIONS=Netherlands
– TZ=GB
– HTTPPROXY=off #change to on if you wish to enable
– SHADOWSOCKS=off #change to on if you wish to enable
– FIREWALL_OUTBOUND_SUBNETS=172.20.0.0/16,192.168.5.0/24 #change this in line with your subnet see note on guide.
network_mode: synobridge
labels:
– com.centurylinklabs.watchtower.enable=false
restart: unless-stopped
qbittorrent:
image: linuxserver/qbittorrent
container_name: qbittorrent
environment:
– PUID=1029
– PGID=100
– TZ=GB
– WEBUI_PORT=8090
volumes:
– /volume1/docker/qbittorrent:/config
– /volume1/data/torrents:/data/torrents
network_mode: service:gluetun # run on the vpn network
depends_on:
– gluetun
restart: unless-stopped
Hey, can you ping me a message via my Help Me! page as your Logs for Gluetun will show why it is not connecting to your VPN.
Just pinged you a message.
I just recently started getting this error as well, after a few months with no issues. Were you able to find a fix?
We still have not got to the bottom of this one. Can you try rolling back to an older version of the Image.
image: qmcgaw/gluetun:v3.34.1
or
image: qmcgaw/gluetun:v3.34.0
I wanted to ask, now that Mullvad is stopping port forwarding, will this affect this guide in any way? Thanks!!
Hi – without port forwarding you will find seeding becomes a bit slower due to connecting to other peers will be reliant on the Tracker showing you as available. I know a lot of people are moving to other providers because of this. Guide wise there are no changes.